Нов
SmallRig

SmallRig

6538 Dummy Battery Power Cable for D-Tap for Sony NP-FW50

Designed for long video recording, livestreaming, and other extended shooting scenarios, and is easy to install and use. By connecting to an external power source, such as a V-mount battery, through the D-Tap interface, it provides continuous power to the camera, reducing the need for frequent battery changes.

Прочетете повече
Номер на продукта
139307
Номер за артикула на доставчика
6538
EAN
6941590033648
SmallRig 6538 Dummy Battery Power Cable for D-Tap for Sony NP-FW50

A built-in smart display screen shows input voltage and power status in real time. 

When the voltage is above 13.0V, the green indicator stays on to show sufficient power. When the voltage drops below 13.0V, the red indicator provides a low-power warning. 

If the D-Tap connector is inserted in reverse, no voltage will be displayed, and reverse-connection protection will be triggered. Reconnect the cable in the correct direction to restore normal operation.

Featuring an upgraded chip, it delivers seamless camera compatibility without warning messages. 

The dummy battery is molded to the dimensions of the original battery for smooth installation and removal. 

It also includes multiple safety protections, including overvoltage, overheat, overcharge, and short-circuit protection, and features a flame-retardant ABS housing for safe, reliable long-term use.

Certifications: FCC, CE, RoHS, ISED, RCM, Quality Inspection Report, and Structural Analysis Report

Technical Data:
  • Max Output Voltage: 8.4V
  • Min Output Voltage: 7.8V
  • Input Voltage: 9.0V to 17.0V
  • Input Current: 2.0A
  • Output Current: 2.0A (Continuous)
  • Output Protection Current: 4.5A to 5.5A
  • Operating Temperature: -20°C to 50°C 
  • Storage Temperature: -20°C to 60°C 
  • Battery Housing Material: ABS
  • Input Specification: D-Tap male connector with a coiled cable extendable from 80.0cm to 100.0cm

Display Status:
  • Solid green light with voltage displayed: Input voltage is above 13.0V, and the power level is sufficient.
  • Solid or flashing red light with voltage displayed: Input voltage is below 13.0V, and the power level is low.
  • Solid red light with no voltage displayed: The D-Tap input is connected in reverse, triggering reverse-connection protection. Reconnect it in the correct direction for normal use.

 Compatibility:
  • Compatible with Sony ZV-E10, α6500, α7, α7R, α7R II, α7S, NEX-7, NEX-6, NEX-5 series, NEX-3 series, and DSC-RX10 series
Packaging includes:
  • D-Tap to NP-FW50 Dummy Battery Power Cable
  • User Manual

Технически спецификации

Варианти

Показване като
Нов
6537 Dummy Battery Power Cable for D-tap for Nikon EN-EL15c
Номер на продукта
139306
EAN
6941590033631
Нов
6655 Dummy Battery Power Cable for D-tap for Sony NP-FZ100
Номер на продукта
139308
EAN
6941590033709
Нов
6656 Dummy Battery Power Cable for D-tap for Canon LP-E6P
Номер на продукта
139309
EAN
6941590033716

Изтегли

Изображения на продукта

Изтегли

Логотипи на марките

Изтегли

Focus Nordic AB Branch Bulgaria Sofia 1606, Sofia Province (capital); Sofia Municipality, Krasno Selo District, Todor, Burmov Street, No. 4A, Floor 1 ДДС: BG208600294

Намерете на картата

Абонирайте се за бюлетин

Получавайте най-новите продуктови новини, вдъхновение и специални оферти.

©2026 Focus Nordic Bulgaria