Pro Video Tripod Kit Rapid SVT-75 Pro + Fluid Head SVH15

Sirui Pro Video Tripod Kit Rapid SVT-75 Pro + Fluid Head SVH15

Sirui Pro Video Tripod Rapid SVT-75 Pro
Compared with traditional knob or flip leg lock setup tripods, SIRUI SVT75 is One-Step Height Adjustment design, which means that you can pull only one ergonomic flip on every leg to set up and lock the tripod.
With these ergonomic flip located at the top of the tripod legs, makes it easily to adjust the tripod height.
All the legs of the tripod can be deployed simultaneously and can quickly adjust to the height that you need, depending on the ground’s surface – eliminating the need to bend over or manually adjust multiple brakes on each leg. Even with heavy equipment, this One-Step Height Adjustment design allows adjusting height up and down quickly and flexibly, which is suitable for quick moving shooting.

Ergonomic flip-lock design helps operate easily even with gloves.
Strong locking force prevents the equipment from accidental falling.

This tripod is equipped with a 75mm bowl, and can be used with Sirui 75mm Half-Bowl Quick Release Handle (included in this Pro version) for fast and smooth adjust of horizontal use.

The diameter of each leg is 40mm.
Besides, carbon fiber construction decreases the weight an at the same time increases the stability.
The maximum load is 25kg, making it possible to carry heavy equipment and shoot for longer time.

The mid-level spreader (included in this Pro version) can be added to help stabilize the entire support system.
You can extend or retract the length of the spreader to help fine adjust the angle of the legs via twist-lockings.

Fixed legangles; Each leg can be locked in one of the three positions (22°, 50° and 78°) via the semi-automatic knob.

The height of the tripod can be adjusted from as low as 21cm (without midspreader) to 153cm (without head).

The tripod have feet of "Dual spikes" which is compatible with SIRUI DT-06 Tripod Dolly or other universal accessories, and can be used also with including horseshoe feet, which works well on even ground and increases the stability of tripod.

This Pro-version also include a very practical carrying handle, which can be mounted with a built-in 4mm Allen key, which also helps adjust tightness of quick release plate quickly.

Fluid Head SVH15
Most fluid heads are designed with damping gear adjusting structure, which can not balance different cameras size and weight, or inverted chip structure, which can not be used at low temperature.
To make up for the shortage, fully NF blocking hydraulic damping is designed in SIRUI SVH15 to ensure smoothly operating from -40℃ to 60℃.
The incremental pan and tilt drag-control can also balance different camera size and weight.

7 steps of counterbalance can balance different camera weight from 4kg to 15kg, making it universal and flexible.

When using equipment of different weight, the stepless pan and tilt drag-control allows locking the head in any position safely.
You can also flexibly adjust the position when adding or reducing accessories.
In addition, the angle of the head with heavy equipment can easily be adjusted.

Instead of the traditional insert method, side loading is designed on SVH15 head, which means that you can insert equipment from one side both easily and quickly.
Even with heavy equipment, it also works well.
After side loading, there is a 30mm back and forth range for adjustment, helping shooting with telephoto lens.

Besides built-in quick release plate, this SVH15 video head is compatible with DJI RS2 / RS3 / RS3 Pro Quick Release Plate, which allows instantly switching camera between stabilizer and tripod.

This SIRUI Pro Video Fluid Head SVH15 also includes a 75mm Half-Bowl Quick-Release Handle, which allows quick release with only 2 seconds.
Just rotate the handle 2 turns, press the knob and pull out the handle.
To insert; Just insert the handle and rotate it 2 turns in an anticlockwise, which helps increase the efficiency and locking tightness. And it is 2 or 3 times tighter than other products.

SVH15 Drag-Control Video Fluid Head and QH-75 Half-Bowl Quick-Release Handle can be separated and used independently.
That makes the SVH15 Video Fluid Head also be compatible with rails/Sliders.
Besides, QH-75 Half-Bowl Quick-Release Handle works well with other flat base head for flexible operation.

Dual Handles. Angle and length adjustable handle with rubber sleeve improves operation experience

Package includes:

• 1x Sirui Pro Video Tripod SVT75 Pro
  

• 1x Sirui Pro Video Fluid Head SVH15
  

• 1x Sirui 75mm Half-Bowl Quick Release Handle
  

• 1x Mid-level spreader
  

• 1x Carrying handle
  

• 1x Carrying Bag
  

• 3x Rubber feet